Want it on ? Order within
00 Hours
00 Minutes*
Price Match Promise
Have you seen this item for less elsewhere?
Description
High quality solid carbon quivertip spares and replacements that fit the entire current Daiwa feeder rod range. With test curves available from a sensitive 0.75oz right up to 2.0oz.
Features
- A complete selection of quiver tips to fit across the Daiwa feeder rod range
- Carbon Solid
- Seaguide MKG Guides with LS Rings
Specifications
- 0.75oz Regular - Product Code CQ0.75OZ-AX
- 1oz Regular - Product Code CQ1OZ-AX
- 1.5oz Regular - Product Code CQ1.5OZ-AX
- 2oz Regular - Product Code CQ2OZ-AX
- 1oz Heavy - Product Code CTF1OZ-AX
- 1.5oz Heavy - Product Code CTM1.5OZ-AX
- 2oz Heavy - Product Code CTH2OZ-AX
- 3oz Heavy - Product Code CTXH3OZ-AX
- 4oz Heavy - Product Code CTXXH4OZ-AX
Works well with
- Daiwa N'zon Feeder Rods - Product Code NZF1002Q-AX-202Q-AX
- Daiwa N'zon Super Slim Feeder Rods - Product Code NZSSF902Q-AX-1303XPQ-AX
Questions and Answers
Q
Will these fit the Daiwa d carp feeder rods?
A
Hi Michael,
As far as I know they don't, and the precise replacement tips for the D carp series also fit the Ninja feeder rods. These tips are currently not available from us due to them not being available to order from Daiwa. Given you're one of several customers to have enquired, were hoping'to add them in the near future. In the meantime if you wanted to see if you can find them elsewhere, I've copied the product codes in below.
DCF-1oz -&
Q
Hi, l have a Daiwa 10Q carp feeder Model No DCF10Q-AU Length 10 foot 2PC+1QT Carp feeder I’m trying to locate the tip for this feeder rod, as I broke the tip off and I love this little rod could you please help me locate one please. Stuart
A
Hi Stuart,
If its the actual tip section itself that's broken, rather than just a quivertip. We don't stock or supply spares from our website. Quivertips, we can possibly help as we stock quite a few options from Daiwa. If it is the actual tip section though, your best bet here is to contact Daiwa direct. They should be able to point you in the direction of someone that can help. They're normally pretty responsive and helpful.
<a href="https://www.daiwaspo
Q
Would this fit a old Diawa porky pig heavy feeder rod
A
Hi Joshua,
If its a high end Daiwa feeder rod they usually print the codes on the tips so you can order more in the event of a breakage. I don't think it's a rod we've ever sold or have any information on here so I'm limited in what help I can give. If those codes aren't there and you can at tell us the length and casting weight we should able to go to Daiwa direct and see if they can help.
Regards
TackleUK
Q
Would the 3oz/4oz replacement tips fit the 13’ Daiwa Amorphous Rods ?
A
Hi Malcolm,
Its difficult to say, there's no guide or chart for us to go off here. Its probably a question best addressed to Daiwa themselves. If you've got access to facebook they're pretty helpful and responsive or you can message them via their website
https://www.daiwasports.co.uk/contact-us
Regards
TackleUK
Q
Hiya I have a Nzon S method feeder 1002Q. Please can you tell me what’s the difference between standard and heavy, what tip will fit as the chart isn’t very clear many thanks JB
A
Hi John,
I'm afraid as that rod is now discontinued, I wouldn't be able to advise which tip would be compatible.
The tips that you have with the rod, should have codes on, that can be matched to the website, so you know which are suitable, alternatively I'd have to advise to contact Daiwa directly.
Sorry we cannot be of more help.
Kind regards
Tackleuk
Q
Can I get the dcf 1.5oz
A
Hi John,
I'm not sure which tip you are referring to but I have included a link below to all the Daiwa tips, we currently have available. Hope this helps.
https://www.tackleuk.co.uk/Shop/Brands/Daiwa/Feeder-Rod-Tips '
Kind regards
Tackleuk
Q
Do these fit black widow feeder rods
A
Hi Simon,
As we don't stock these rods, I'm unable to check for you, Sorry .There is a compatibility chart in the photos for the product, which will allow you to see which quiver tips are suitable for the rod.
Kind regards
Tackleuk '
Q
Hello. Will these tips fit the new Nzon super slim range
A
Hi Matthew,
These should fit the N'zon Super Slim Feeder rods.
https://www.tackleuk.co.uk/Shop/RodsFeederRods/Daiwa-Nzon-Super-Slim-Feeder-Rods.htm
Kind regards
Tackleuk
Q
Are these compatible with nzon s quiver. So 2.4mm
A
Hi Sean,
They should fit the N'zon range, just match the codes on the tips to order the right ones. There are regular and heavy options depending on which length you have.
Regards
TackleUK
Loading...
Q
{{ question.question }}
A
{{ answer.answer }}
A
No answers have been submitted for this question.
Be the first to ask a new question
Loading...
Reviews
{{ review.headline }}
{{ review.review }}
Delivery
Estimated Delivery:
To
- Our system will provide you with an expected day of delivery when you checkout, but if you order before 1pm this item can be dispatched the same working day, orders placed after 3pm will usually be processed the next working day. Once the order has been dispatched it will either arrive with Royal Mail or DHL.
- We only dispatch Monday to Friday, so if you order after 3pm on Friday then your order will be dispatched on Monday.
- *Next day delivery is available if you select DHL Delivery or Royal Mail 24 at checkout. Please note that this is an estimate only and not a guaranteed service.
- For more information please see our Delivery Information.
